Contact Us
+604-240 0930

Share:


Line Filters 7-405

Air quality required throughout a typical compressed air system varies. Ceccato can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum by offering an extensive filter range.

Specifications:
  S D G C P V
Filter type Solid particles Solid particles Oil aerosol & solid particles Oil aerosol & solid particles Oil aerosol & solid particles Oil vapor
Test method ISO 12500-3 ISO 12500-3 ISO 12500-1 ISO 8573-2 I ISO 12500-1 ISO 8573-2 ISO 12500-1 ISO 12500-3 ISO 8573-2 ISO 8573-5
Inlet Oil Concentration (mg/m³ ) NA NA 10 10 10 0.01
Count efficiency (% at MPPS) ** (MPPS=0,1 μm) 99,81 (MPPS=0,06 μm) 99,97 NA NA (MPPS=0,1 µm) 89,45 NA
Count efficiency (% at 1 μm) 99,97 99,999 NA NA 94,19 NA
Count efficiency (% at 0,01 μm) 99,87 99,992 NA NA 93,63 NA
Max oil carry-over (mg/m³) NA NA 0.1 0.01 1 0.003
Dry pressure drop (mbar) 120 140 NA NA 85 160
Wet pressure drop (mbar)* NA NA 205 240 115 NA
Wet pressure drop (mbar), in typical compressor installation NA NA 185 200 NA NA
Element service After 4.000 operating hours or 1 year or pressure drop > 350 mbar After 4.000 operating hours or 1 year or pressure drop > 350 mbar After 4.000 operating hours or 1 year After 4.000 operating hours or 1 yea After 4.000 operating hours or 1 year After 1.000 operating hours ( at 20°C.) or 1 yea
Precede with - S water separator - G & C

* Inlet oil concentration = 10 mg/m³
** MPPS = Most Penetrating Particle Size


 Inquiry - Line Filters 7-405